Contact by email

PHOENIX JR. INTRUDER BEACON is used in conjunction with night vision devices (NVD) to detect and signal night movement along trails, roads and entry points. Using a GPS receiver for precise reference, several Phoenix Jr. Intruder Beacons may be accurately implanted for preplanned targeting. The Intruder Beacon flashes at a rate four times faster than the Phoenix Jr. thus differentiating it from the standard combat identification signal.

SETTING UP A NIGHT PERIMETER may include the implanting of tripwire activated markers. The Phoenix Jr. Intruder Beacon offers the perfect solution. Combat teams equipped with a GPS receiver can quickly implant and accurately document the location of the Intruder network. At night one NVD equipped sentry can easily watch over the network. When a beacon is tripped the intruder is typically not aware of his problem until the first mortar round lands on the beacon’s position.

· Trip switch with one 50’ trip wire bobbin
· Small, lightweight, waterproof and durable
· Easily implanted by one individual
· Magnetic mounting fee t included
· Combat tested technology
· Two tie points
· Rapid flash rate

THE PHOENIX JR. INFRARED INTRUDER BEACON is used in conjunction with night vision devices (NVD) to detect and signal night movement along trails, roads and entry points. The beacon’s outside finish is red, differentiating it from the more common Phoenix Junior, combat identification beacon. The red indicates it has a flash rate that is four times faster that Phoenix Jr.


SPECIFICATIONS
Weight: 1 ounce
Size: 1.5" x .625" H
Battery: Common 9 volt
Configuration: 3 Light Emitting Diodes (LED)
Coverage: 180 degrees x 180 degrees
Activation: Attach battery
Switching: Trip wire controlled
Operating depth: the battery contact is exposed however if immersed the unit will continue to operate until the battery contacts fail due to water and electrolytic corrosion. Given these conditions the depth limitation is solely determined by the battery’s ability to withstand depth.

SUPPLIED ITEMS
Infrared beacon
Trip switch module w/trip switch
Trip cord bobbin (1)
Fifty feet (50’) trip cord

Light Output Frequency :
Infra Red - 880 nm
Alternate frequencies available on request